Lab 11 Laptop Hardware. (46 points)
Activity 1 Hardware Properties of the Computer 
1.	Click on the start button.
2.	Right click on Computer and from the list select Properties.
3.	Using the information under System fill in the following chart. (4 points)
Rating (you may need to run the experience rating to see this information)		
Processor		
Installed Memory		
System Type		

4.	On the left side of the System window click on Device Manager
Activity 2 Device Manager
1.	Expand the device manager to full screen.
2.	Expand the Computer by clicking on the triangle.
3.	Double click on the listing found under Computer.
4.	Fill in the following table (4 points)
In the General tab what is the type of computer		
Click on the Drivers tab fill in the following		
   Drive Provider		
   Driver Date		
   Driver version		

5.	Close the dialog box
6.	Expand Disk Drives
7.	Double click on the hard drive listing
Fill in the following table (5 points)
In the General tab what is the bus location		
Click on the Drivers tab fill in the following		
   Drive Provider		
   Driver Date		
   Driver version		
Click on Policies		
What policy is enabled		

8.	Close the dialog box
9.	Expand Display adapters
10.	Double click on the display adapter listed
11.	Fill in the following table (5 points)
In the General tab what is the bus location	
Click on the Drivers tab fill in the following	
   Drive Provider	
   Driver Date	
   Driver version	
Under the Resources tab what is the IRQ being used	

12.	Close the dialog box 
13.	Expand DVD/CD-ROM Drives
14.	Double click on the drive listed
15.	 Fill in the following table (5 points)
In the General tab what is the bus location		
In the DVD Region tab what does the caution say.		
Click on the Drivers tab fill in the following		
   Drive Provider		
   Driver Date		
   Driver version		

16.	Close the dialog box
17.	Expand Processors
18.	Click on one of the cores listed
19.	Fill in the following table (4 points)
In the General tab what is the location		
Click on the Drivers tab fill in the following		
   Drive Provider		
   Driver Date		
   Driver version		

20.	Close the dialog box
21.	Expand Universal Serial Bus controllers
22.	Double click on the first Intel(R) 6 Series/C200 Series Chapset Family USB listing
23.	Fill in the chart below (5 points)
In the General tab what is the bus location		
In the advanced tab what is consuming the most band width?		
Click on the Drivers tab fill in the following		
   Drive Provider		
   Driver Date		
   Driver version		

Activity 3 Power Options
1.	Open the Control Panel
2.	Click on System and Security
3.	Click on Power Options.
4.	What is the currently selected power plan? (2 points)

5.	Click on Change plan settings for the currently selected power plan.
6.	What are the current settings for (4 points)
Turn off the Display		
Put the computer to sleep		

7.	Click on Change advanced power settings.
8.	Expand Hard disk and Turn off hard disk after
9.	What is amount time before the hard disk is turned off ? (2 points)

10.	What is the current Power saving modefor the Wireless adapter? (2 points)

11.	What is the current setting for turning off the display? (2 points)

12.	How long before the Sleep mode is started? (2 points)